Privately held company “[NPO] Of [korrZashchita]”, developer and the exclusive supplier of anticorrosive protection - paints of priming enamels [SBE]-111 [UNIPOL]® of those used as the corrosion protection of the steel metal structures, exploited due to the atmospheric conditions: To anticorrosive protection to the material [SBE]-111 “OF [UNIPOL]” ® the stamp OF AM beyond the silicone- modified basis, is characteristic the formation of flat lusterless coating. With the thickness of the coating 140-160 m, applied down the steel surface, it preserves the shielding anticorrosive properties of the under operating conditions open atmosphere of the industrial zone of the moderate and cold climate for 12 years. Anticorrosive coating priming enamel [SBE]-111 “OF [UNIPOL]” ® it is possible to bring due to the conditions of minus temperatures to minus of 25o[S] and high relative humidity of air, it possesses the rapid time of drying at low temperatures (1 2 hours), is characterized by excellent painter properties. Anticorrosive protection priming enamel [SBE]-111 “OF [UNIPOL]” ® stamp V -[Se] beyond the silicoepoxy basis, forms smooth semigloss, anticorrosive coating. With the average thickness of coating 120 m it is past climatic testings for the conditions of the industrial atmosphere of the zones of the moderate and cold climate, and is [rekomendovana] for the anticorrosive protection of the external surface of storage tanks of oil and petroleum products with the period of the service of 15-20 years and corresponds to the requirements, affirmed to joint stock company “[AK] “trans-oil”. Also priming enamel [SBE]-111 “OF [UNIPOL]” ® stamp V -[Se] is [rekomendovana] for the operation in the atmosphere of all climatic zones of dry land and sea with the period of service not less than 3 years. The anticorrosive protection of the metal structures of the bridge spans of bridges with the period of service is not less than 15 years Anticorrosive protection is priming enamel [SBE]-111 “OF [UNIPOL]” ® stamp ATs - 80 m Anticorrosive protection is priming enamel [SBE]-111 “OF [UNIPOL]” ® stamp AM -160 m The overall thickness of anticorrosive coating - is 240 m as a result of three layers. This anticorrosive system possesses high shielding and decorative properties, materials can be brought at minus temperatures to minus of 25o[S], they possess excellent painter- technological properties, the time of interlamination drying composes tentatively 1 Oe hour depending on putting temperature from plus of 35o[S] to minus of 25o[S] respectively. Anticorrosive protection ground [SBE]-111 “OF [UNIPOL]” ® beyond the natural rubber- alkyd basis with the thickness of single-layer anticorrosive coating 60-80 m ensures the anticorrosive protection of metal structures not less than 1 year due to the conditions of the open atmosphere of the industrial zone of the moderate and cold climate. Furthermore, anticorrosive ground [SBE]-111 “OF [UNIPOL]” ® it is possible to bring due to the conditions of minus temperatures to minus of 25o[S], and so anticorrosive coating possesses the following properties: the time of drying down the degree of 3- of 15 minutes before Vol. h. at minus temperatures; the time of drying down the degree are 5th 24 hours before Vol. h. at minus temperatures. Data of the characteristic of anticorrosive ground [SBE]-111 “OF [UNIPOL]” ® make it possible to produce anticorrosive works the year round, to reduce the time of painting constructions, t to anticorrosive ground is brought beside one layer, and to reduce the time of storing, t to the transportation of the painted metal structures can be produced after 24 hours. Anticorrosive protection priming enamel [SBE]-111 “OF [UNIPOL]” ® stamp ATs - zinc-filled anticorrosive composition beyond the natural rubber- resin basis, that ensures the cathodic corrosion protection of steel articles, with the thickness of the layer 75-80 m ensures the anticorrosive protection of metal structures not less than 2 years due to the conditions of the open atmosphere of the industrial zone of the moderate and cold climate. Anticorrosive coating priming enamel [SBE]-111 “OF [UNIPOL]” ® stamp ATs it is possible to bring due to the conditions of minus temperatures to minus of 25o[S]. It possesses rapid drying The proposed paints [SBE]-111 “OF [UNIPOL]” ® underwent the appropriate tests before “[LKP]-[KHOTKOVO]- TEST”, [OOO] “the institute of VNIIST (All-Union Scientific Research Institute for the Construction of Trunk Pipelines)”, joint stock company “TsNIIS”, [OOO] [NPF] “SPECTRUM- VARNISH COLOR” see THE TEST RECORD SHEETS.

You look also: Acquaintance with [UNIPOL]® Form of claim for the enamel Stamp OF THE AM Stamp AT Stamp ATs (zincfilled) Stamp V -[Se] [Unipol] ground