|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
Catalog of the production |
|
 |
![Enamels [UNIPOL]®](../i/hdr-catalog.gif)
|
Catalog of production [UNIPOL]® - protection for the metal and the concrete FIRE PROTECTION, ANTICORROSIVE MATERIALS, WATERPROOFING [UNIPOL]®
| Fire-retardant materials |
| [INTUMESTERM] |
[Organorazbavlyaemaya] fire-retardant distending itself paint. It possesses the rapid time of drying. Is brought with the temperature from - 25o[S] and the high relative humidity of air. Is intended for increasing the fire resistance of the carrying metal constructions on 60 min. is formed closegrained system, it is technologically effective before the work. |
| “[UNIPOL]” ® stamp OP |
[Organorazbavlyaemaya] fire-retardant distending itself paint. It possesses the rapid time of drying. Is brought with the temperature from - 25o[S] and the high relative humidity of air. Is intended for increasing the fire resistance of the carrying metal constructions as far as 45 and 90 min. is formed closegrained system, it is technologically effective before the work, coloring in different colors is possible. |
| “[UNIPOL]” ® stamp OV |
Waterd-dilute fire-retardant distending itself paint. It possesses the rapid time of drying. It is ecologically safe, not toxic, fire-and-explosion-proof. Is intended for increasing the fire resistance of the carrying metal constructions as far as 45 and 90 min. is formed closegrained system, it is technologically effective before the work, coloring in different colors is possible. It is recommended for the putting in the closed and badly aired accomodations. |
Weatherproof and chemically resistant anticorrosive enamels [SBE]-111 “OF [UNIPOL]” ®
for the protection of metal structures and equipment through the carbon and galvanized iron, the concrete and ferroconcrete construction |
| “[UNIPOL]” ® the stamp OF THE AM |
Single-component silicone- acrylic antifouling paint, priming enamel of air drying. It possesses the increased resistance to UV radiation and the rapid time of drying. It is brought at a temperature from minus of 25o[S] and high relative humidity of air. It is intended as the [samogruntushcheesya] anticorrosive coating for the lasting corrosion protection of the steel structures, which are exploited due to the conditions of the industrial atmosphere of the zones of the moderate and cold climate. Adapts as independent, and so as the shielding decorative anticorrosive coating before the integrated systems of anticorrosive protection with the zincfilled anti-correspondentOEionic priming enamel [SBE]-111 “OF [UNIPOL]” ® stamp ATs and by other anticorrosive ground beyond the alkyd, acrylic, epoxy, and other basis, except nitrocellulose. It is recommended for painting of bridges, cranes, steel masts, piles, cross bars of conduits and other steel constructions and equipment. |
| “[UNIPOL]” ® stamp V -[Se] |
Two-packing antifouling paint, priming enamel beyond the siliconeepoxy basis. It possesses resistance to the action of fresh and sea water, crude oil, mineral oils, petroleum residue, industrial atmosphere (including coastal and sea regions with the high salinity), UV radiation. It is intended as the [samogruntuyushcheesya] anticorrosive coating for the anticorrosive protection of steel constructions. It is recommended for the anticorrosive protection and the decorative finishing of above-water board and superstructures of the vessels of the unlimited region of floating, external surfaces of main ground-based oil pipelines and storage tanks of oil and petroleum products. The anticorrosive enamel [UNIPOL] of stamp V -[Se] is compatible with the regular ship coatings: ECHIS -065, [VL]-023, [EP]-0263[S], pF -167, [Evinal] 21. |
| “[UNIPOL]” ® stamp B |
Single-component anticorrosive, chemically resistant paint, priming enamel [UNIPOL] of stamp B, air drying beyond the natural rubber- resin modified basis. It possesses the rapid time of drying and the possibility of putting the not flowing layers to 100 m (200 m before the wet state) beyond the vertical surfaces, the contiguities and the cavities without the inflows. It is brought with the temperature from -25o[S] and the high relative humidity of air. It is intended as the [samogruntuyushcheesya] anticorrosive coating for the anticorrosive protection of steel (including zinc-coated), concrete and ferroconcrete constructions. The waterproof and chemically resistant anticorrosive covering, which maintains lasting effect of fresh and sea water (to 70o[S]), dry mineral salts and alkalis, their concentrated aqueous solutions, is formed. It is recommended for the anticorrosive protection of the internal surfaces of ship conduits, ballast tanks, equipment of the water-supply systems, water purification, fire extinguishing, technological conduits, bodies of cooling towers pans, railroad cars -[mineralovozov], depositories of the mineral fertilizers and the like it adapts for the operation before the accomodations (volumes) with the increased humidity without the direct action of solar rays (for example, in the unheated and those not ventilated accomodation, holds, tunnels, mines, shops the like). |
| “[UNIPOL]” ® stamp [v] |
Two-packing anticorrosive chemically resistant paint is priming enamel [UNIPOL] stamp [v] beyond the natural rubber- epoxy basis. It is intended as the [samogruntuyushcheesya] anticorrosive coating for the anticorrosive protection of steel, concrete and ferroconcrete constructions. The waterproof and chemically resistant anticorrosive covering, which maintains the lasting effect of water, mineral acids of average and high concentrations (sulfuric, salt, phosphoric, hydrofluoric), is formed. It is recommended for the anticorrosive protection of the internal surfaces of technological equipment and conduits of the working before the contact with the mineral acids, constructions of being undergone glazing and wetting, ferroconcrete foundations and embankments for equipment, the chutes, the sexes, the stairs of production accomodations with small traffic volume (laboratory, shop, storages the like). |
| “[UNIPOL]” ® stamp [VU] |
Two-packing anticorrosive chemically resistant paint is priming enamel [UNIPOL] stamp [VU] on the basis of fluorineepoxy resin. It possesses excellent resistance to strongly aggressive media. It is intended for the anticorrosive protection of steel constructions. Anticorrosive, chemically resistant coating, which maintains the lasting effect of the solutions of mineral acids (sulfuric, salt, phosphoric, hydrofluoric), mixtures of mineral acids, strong oxidizers (30% nitric acid, galvanic media), is formed. It is recommended for the anticorrosive protection of the equipment of galvanic shops, capacities for storage and transportation of aggressive media. |
| “[UNIPOL]” ® stamp [VE] |
Single-component anticorrosive chemically resistant paint is priming enamel [UNIPOL] of stamp [VE] beyond the natural rubber- resin basis. Is brought with the temperature from - 25o[S] and the high relative humidity of air. It is intended as the [samogruntuyushcheesya] anticorrosive coating for the anticorrosive protection of steel, concrete and ferroconcrete constructions. The chemically resistant anticorrosive coating, which maintains the lasting effect of the mineral acids of high concentrations (sulfuric, phosphoric, hydrofluoric) at a temperature to 70o[S], is formed. It is recommended for the anticorrosive protection of the internal surfaces of technological equipment. |
Special anticorrosive enamels [SBE]-111 “OF [UNIPOL]” ®
for the anticorrosive protection of metal structures and equipment through carbon steels, for the anticorrosive protection and waterproofing of the concrete and ferroconcrete construction |
| “[UNIPOL]” ® ground |
It adapts as anticorrosive ground of interoperational storage and before the systems of anticorrosive coatings with further overlapping by finishing varnish-and-paint anticorrosive materials. It is recommended for the painting and the anticorrosive protection of steel constructions both due to the plant conditions and on the spot installation, and also for repairing the existing anticorrosive coatings. It is brought at a temperature from - 25o[S], down the moist metallic surfaces, easily yields to repair, after 30 min it is possible to mount the painted constructions. |
| “[UNIPOL]” ® stamp AT |
It is intended as the [samogruntushcheesya] anticorrosive coating for the corrosion protection of steel surfaces, technological equipment, that are undergone before the process of operation the action of the temperature to +200o[S]. It is recommended for the painting and the anticorrosive protection of external surfaces petroleum-, gas-, steam pipelines, the systems cold and hot water supply, chimney stacks and so forth |
| “[UNIPOL]” ® stamp T |
It is intended as the [samogruntushcheesya] anticorrosive coating for the corrosion protection of steel surfaces, technological equipment, that are undergone before the process of operation the action of the temperature to +300o[S] (enamel of air drying) and +700o[S] (enamel of hot drying). It is recommended for the painting and the anticorrosive protection of the external surfaces of steam pipelines, technological all-product lines, equipment of boiler economy, chimney stacks and so forth |
| “[UNIPOL]” ® the waterproofing |
It is intended for waterproofing of buildings, underground structures, device of roofings, waterproofing of foundations, anticorrosive protection of conduits. The width of crack opening 1,2 mm is maintained
|
| “[UNIPOL]” ® stamp AP |
It is intended as the [samogruntushcheesya] coating for the protection of concrete, cement, brick surfaces. It is recommended for painting the old and new concrete and asphalt sexes, which are subjected average mechanical and chemical load both inside and outdoors, for example, of the sexes of production and warehouse accomodations, balconies, stairs areas, basements, and so mineral roofing sheeting. |
| “[UNIPOL]” ® stamp AP- M |
It is intended as the [samogruntushcheesya] coating for the protection of concrete, cement, brick surfaces. It is recommended for painting the old and new concrete sexes, which are subjected high mechanical load both inside and outdoors. For example, the sexes of production and warehouse accomodations with the intensive motion of lift loaders, heavy cargo machines, garages, open [parkingov]. |
| “[UNIPOL]” ® stamp [PV] |
It is intended for the putting directly under water for the anticorrosive protection of steel and ferroconcrete constructions (mine, tunnels, water-engineering constructions, moorages). |
|
|
|
|
 To unseal the page |
|
