Priming enamel [SBE]-111 [UNIPOL]® stamp [VU] is produced on the basis of fluorine-containing elastomer. Distinguish special chemical resistance, water resistance, wear resistance. Counter on Wednesday of a constant action of the diluted and concentrated mineral acids, including of nitric, sulfuric, salt, hydrofluoric, sulfurous and so forth at operating temperature to plus of 80°[S], phosphoric - to plus of 120°[S], oil to petroleum products, to natural gas at temperatures to plus of 150°[S]. Coating has good elasticity characteristics during the aging, it is improved by adding the special combination of pigments and fillers. The enamel [UNIPOL]® of stamp “[VU]” can be used, for the anticorrosive protection: carbon steels, including of those zinc-coated and parkerized; constructions through the stainless steel, including [passivirovannuyu] steel; constructions from aluminum and its alloys. The enamel [UNIPOL]® of stamp “[VU]” is let out any color at will of customer. Coating on the basis of enamel [UNIPOL]® can overlap for the sake of paints on the basis vinyl, epoxy, alkyd, urethane, rubber and other bases; See “compatability with [LKM]”. Special features of the anticorrosive enamel [SBE]-111 [UNIPOL]® of stamp “[VU]”: putting at an ambient temperature from minus of 25°[S] to plus of 35°[S]; atmospheric precipitations do not influence the quality of the coating 1 hour after putting of enamel; coating on the basis of enamel [UNIPOL]® can overlap for the sake of paints on the basis vinyl, epoxy, alkyd, urethane, rubber and other bases; putting enamel with thickness to 100 m of dry film at the point of one layer beyond the vertical surfaces and contiguities without the formation of inflows.

You look also: Opinions of organizations for all stamps Produced colors Technical description Instruction beyond the application Record sheets of the technical tests To send claim for the enamel