ANTICORROSIVE PROTECTION OF METAL STRUCTURES AND FERROCONCRETE CONSTRUCTIONS, WHICH WORK BEFORE THE AGGRESSIVE MEDIA.

Anticorrosive protection is coating the enamel [SBE]111 [UNIPOL]® stamp [v]

Anticorrosive protection priming enamel [SBE]-111 [UNIPOL]® stamp [v] forms chemically resistant anticorrosive coating to the majority of highly aggressive media, including to the mineral acids of average and high concentrations (sulfuric, salt, phosphoric, carbon, hydrofluoric and the like) at temperatures to plus of 50°[S]. anticorrosive protection paint [UNIPOL] is intended for the anticorrosive corrosion protection of metal structures and ferroconcrete constructions, conduits, surfaces of capacities, which work before the aggressive media. Anticorrosive coating has good elasticity characteristics during the aging, it is improved by adding the special combination of pigments and fillers. Anticorrosive protection the paint [UNIPOL]® of stamp “before” can be used, for the anticorrosive protection of carbon steels. The system of anticorrosive protection, coating on the basis of priming enamel “Of [unipol]” of stamp “before” possesses high adhesive properties to the construction of ferroconcrete surface (3.0 MPa). the [Sm].[Nauchno]- research, drawing and designing and technological institute of concrete and reinforced concrete “of NIIZhB (Scientific Research Institute of Concrete and Reinforced Concrete)”: Conclusion about the results of the tests of priming enamel “[Unipol]” of stamp [v] on the concrete about the basic qualitative indeves The anticorrosive enamel [UNIPOL]® of stamp “before” is let out any color at will of customer. Anticorrosive coating on the basis of enamel [UNIPOL]® can overlap for the sake of paints on the basis vinyl, epoxy, alkyd, urethane, rubber and other bases; See “compatability with [LKM]”. Special features of the anticorrosive protection of the enamel [SBE]-111 [UNIPOL]® of stamp “before”: putting anticorrosive protection at an ambient temperature from 0°[S] to plus of 35°[S]; atmospheric precipitations do not influence the quality of anticorrosive coating 1 hour after putting of anticorrosive protection, enamel [SBE]-111 [UNIPOL]®; anticorrosive protection, coating on the basis of enamel [UNIPOL]® can overlap for the sake of paints on the basis vinyl, epoxy, alkyd, urethane, rubber and other bases; putting anticorrosive protection, enamel with thickness to 100 m of dry film at the point of one layer down the vertical surfaces and contiguities without the formation of inflows.

You look also: Record sheets of the technical tests Opinions of organizations for all stamps Produced colors Technical description Instruction beyond the application (metal) Instruction beyond the application (concrete) To send claim for the enamel