Anticorrosive protection the enamel [SBE]-111 [UNIPOL]® stamp V -[Se] forms the shielding anticorrosive coating, steadfast in the atmosphere of the industrial medium of that moderated and cold climatic zones, and also to the majority of highly aggressive media, including to the concentrated alkalis, and also to the petroleum products (gasoline, kerosene, lubricating oils, crude oil). Enamel is intended for the anticorrosive corrosion protection of metal constructions, conduits, internal and external surfaces of capacities. Coating has good elasticity characteristics during the aging, it is improved by adding the special combination of pigments and fillers. Also anticorrosive coating has high decorative properties, it is stable to the washing solutions, while it also possesses the prolonged period of operation, which makes it possible to use this corrosion protection for painting ship and ground transport equipment. PROTECTION PETROLEUM- and OF [GAZOTRUBOPROVODOV] The anticorrosive enamels “Of [unipol] " ® adapt for the corrosion protection of buildings, bridges, vessels, reservoirs of storage of oil and petroleum products, main conduits and units of infrastructure. In connection with this, we request you to examine the possibility of applying the anticorrosive priming enamels “OF [UNIPOL]”: stamps ATs and THE AM for the anticorrosive protection external surfaces of conduits, containers, drain chutes, reservoirs, steel roofs, different tanks, of water pipes and air ducts, of frameworks, metallic supports and the like in the industrial atmosphere of that moderated and cold climatic zones (putting from minus of 25o[S]): Priming enamel [SBE]-111 “Of [unipol] " ® of stamps ATs and AM: Quantity of layers - 3 1. priming enamel [SBE]-111 “Of [unipol] " ® stamp ATs 80 m 2. priming enamel [SBE]-111 “Of [unipol] " ® stamp AM 80 m 3. priming enamel [SBE]-111 “Of [unipol] " ® stamp AM 80 m The overall thickness of coating - is 240 m. The period of the service of coating is not less than 15 years. Conclusion by joint stock company “TsNIIS” [3]. Theoretical flow rate - 240 m complex coating include: priming enamel [SBE]-111 “Of [unipol] " ® stamp ATs - 0,23 [kg]/[m]2 and priming enamel [SBE]-111 “Of [unipol] " ® the stamp OF AM - 0,46 [kg]/[m]2. Price of material - priming enamel [SBE]-111 “Of [unipol] " ® the stamp OF AM - 193,43 rubles/kg Anticorrosive priming enamel [SBE]-111 “Of [unipol] " ® stamp ATs - 285,17 rubles/kg Cost of 1 [m]2 of coating - 154, 57 rubles. Stamp V -[Se] for the anticorrosive protection of the external surface of storage tanks of the petroleum products, ground-based petroleum- and [gazotruboprovodov], drilling rigs, masts, the frames of the bases of technological equipment of the construction of oil output and others, which are exploited due to the conditions of moderate- cold and cold climate and possible periodic contact with the petroleum products (putting from 0o[S]): Anticorrosive priming enamel [SBE]-111 “Of [unipol] " ® stamp V -[Se]: Quantity of the layers: 2 1. priming enamel [SBE]-111 “Of [unipol] " ® stamp V -[Se] 70 m 2. priming enamel [SBE]-111 “Of [unipol] " ® stamp V -[Se] 70 m. The overall thickness of coating - is 140 m. Period of the service of coating 15-20 years. Conclusion BY [OOO] “the institute of VNIIST (All-Union Scientific Research Institute for the Construction of Trunk Pipelines)” [1]. Coating corresponds to the technical requirements rd of 05.00-45.21.30-[KTN]-005-1-05 “of the rules of the anticorrosive protection of reservoirs”, by affirmed joint stock company “[AK] “trans-oil” it is introduced beside the list joint stock company “[AK] “trans-oil” [2]. Theoretical flow rate - 140 m coating 0,38 [kg]/[m]2. Price of material - 277,07 [rub]./[kg] Cost of 1 [m]2 of coating - 105,29 rubles. Application: 1. Conclusion BY [OOO] “the institute of VNIIST” about the period of the service of coating on the basis of priming enamel [SBE]-111 “OF [UNIPOL]” of stamp V -[Se], utilized for the external protection of storage tanks of oil; 2. Extraction from the list joint stock company “[AK] “trans-oil” (priming enamel [SBE]-111 “OF [UNIPOL]” of stamp V -[Se]); 3. Conclusion by joint stock company “TsNIIS” about the period of the service of coating system on the basis of priming enamels [SBE]-111 “OF [UNIPOL]” of stamps ATs and AM.

You look also: Opinions of organizations for all stamps Produced colors Technical description Instruction beyond the application Record sheets of the technical tests To send claim for the enamel