Thermoresistant priming enamel [UNIPOL]® stamp T Priming enamel [UNIPOL]® stamp T forms thermoresistant and weatherproof coating. Priming enamel is intended for the protection of metal constructions of buildings and construction, technological equipment from the action of the industrial atmosphere of the moderate and cold climate and high temperature to 300o[S]. Index Value Connecting basis: organosilicate Composition: Single-component, ready to the application The dry residue: Not less than 60% The relative viscosity of enamel at a temperature (20±0,5) of °C on the viscosimeter of the type Of [v]3-246 (or [VZ]-4) with the diameter of nozzle 4 mm: Is not less than 30 s (about the agreement for the sake of the customer viscosity it can be increased) Degree of the grinding: Not are more than 50 m Color: Any about the agreement for the sake of the customer or on catalog RAL Degree of the dilution: Not more than 5% of the total volume Storage Not to heat. To take care from the fire. Composition to store before the solidly closed container, protecting from the action of heat, the straight lines of the solar of rays and moisture. Guarantee period of storage before the hermetically sealed container of manufacturing plant - six months based on the day of production. Diluents: Xylene, solvent, toluene Putting: By brush, by roller, by the methods pneumo- and airless dispersion Quantity of the layers: 2-3 depending on the aggressiveness of the medium Expenditure and the thickness of the coating: With the recommended thickness of coating 120-150 m The theoretical flow rate ~ of 0,28-0,35 [kg]/[m]2 Putting conditions Priming enamel is allowed to bring at an ambient temperature and painted surface from minus of 10[oS] to 30o[S] and high relative humidity of air. The time of drying the coating with a thickness of 60 m at a temperature (20±2) of wasps and [f]=65% down the degree “of 3” according to GOST 19007, is not more 1 the hour The complete set of the physicomechanical properties of coating at a temperature of 20[o]C and relative humidity of air 65% 5-6 days Index Value The exterior view of the coating Uniform lusterless surface without the foreign inclusions Adhesion, according to GOST 15140-78 method 2 is not more than 1 mark Strength of film with the impact not less than 50 cm Elasticity of coating with the bend not more than 1 mm Hiding power of the dried coating not more than 60 [g]/[m]2 [Termostoikost] of coating with 300o[S] 3 hours Surface preparation Basis Surface preparation C[tal]: down the degree of cleaning S[a] 2,5 (ISO 8501-1) Safety engineering: With conducting of internal work, and after their end thoroughly to also air accomodation. To use individual protective means (TU 2312-001-59846005-2003). The authenticity of present data is based beyond the laboratory tests and the practical experience. As supplier firm cannot bear responsibility for the damage, substituted by the application of material not in accordance with the given out by firm instruction beyond the application or with the use about the incorrect designation. Each individual case of applying the material is individual. Specifications description does not free based on fulfilling of the acting normative requirements of construction legislation. This technical description loses force after the appearance of a new editorial staff of text. The reprinting of texts and illustrations, the quoting of materials are allowed only by written authorization of the authors.