RUP [po] [Belaruskaliy] -

1. The models of the enamel [SBE]-111 “Of [unipol]” of stamp B are represented for the tests beside 0[PKZ] [TSL] RUP “ON “[Belaruskaliy]” of the privately held company [NPO] “Of [korrzashchita]”, Moscow.

2.1 enamel “OF [SBE]-111 “Of [unipol]” of stamp B” forms the chemically resistant, high(ly)-wear-resistant and waterproof covering, which maintains a constant action of dry salts and alkalis, their concentrated solutions, the temporary action of the diluted mineral acids of mean concentrations, which corresponds to the operating conditions of warehouse accomodations and transport for the transportation of the mineral fertilizers.
Enamel is intended for the corrosion protection of metallic and ferroconcrete constructions, and also equipment in the atmosphere of cold climatic zone. Quantity of models of the enamel “OF [SBE]-111 “Of [unipol]” of the stamp B” of -1 (one).

3.1.[Ispytaniya] were conducted for the purpose of the determination of chemical stability the enamels “OF [SBE]-111 “Of [unipol]” of stamp B” to the action of the increased humidity, salt fog, variable temperature and ultraviolet radiation.

№ in sequence	The testing facilities	Test conditions	Time
1.	Camera of the salt fog	Temperature, [T]= (35±2) ^{of o[S]}; Solution Of n[aS]l: [S]= (50+5) of [g]/[dmZ], [rN]=6,5- 7,2	8 hours
2.	Endurance in air	Temperature, [T]= (15-30) ^{of o[S]}; Humidity, is not more than 80%	16 hours
3.	Humidistat G -4	Temperature, [T]=[minus] (40±2) ^{of o[S]}, humidity, W=100%	8 hours
4.	Endurance in air	Temperature, [T]=[minus] (15-30) ^{of o[S]}; Humidity, is not more than 80%	16 hours
5.	Apparatus of the artificial weather	Temperature, [T]=[minus] (40±2) ^{of o[S]}, the ultraviolet radiation	8 hours
6.	Endurance in air	Temperature, [T]=[minus] (15-30) ^{of o[S]}; Humidity, is not more than 80%	16 hours
7.	Camera of cold	Temperature, [T]=[minus] (25±2) ^{of o[S]}	8 hours
8.	Endurance in air	Temperature, [T]=[minus] (15-30) ^{of o[S]}; Humidity, is not more than 80%	16 hours

5.1.[Dlya] of conducting tests adapted models made from steel Of [st].[Z] according to GOST 9.083-78, degree of cleaning the surface of metallic models -2 according to GOST 9.402-80 and concrete cubes by the size of 40x40x40 mm.

5.2.[Na] the metallic models of №20,21,22 applied [SBE]-111 “Of [unipol]” of stamp [B]. [Pokrytie] lusterless. The thickness of dry film was 220-230 m.

№ of the model	Index	Normative documents	Indices
20	The exterior view	ALL-UNION STATE STAN. of 9.407-84 coatings varnish-and-paint. Method of evaluating the exterior view	Uniform, lusterless surface. The signs of the destruction of coating it is not observed
21	The exterior view	ALL-UNION STATE STAN. of 9.407-84 coatings varnish-and-paint. Method of evaluating the exterior view	Uniform, lusterless surface. The signs of the destruction of coating it is not observed
22	The exterior view	ALL-UNION STATE STAN. of 9.407-84 coatings varnish-and-paint. Method of evaluating the exterior view	Uniform, lusterless surface. The signs of the destruction of coating it is not observed

7.1. On the basis the results of the laboratory cyclic tests enamel “[SBE]-111 “Of [unipol]” of stamp B” is recommended for the experimental-industrial tests due to the conditions of the moderately aggressive media OF SOFAS RUP “ON “[Belaruskaliy]” for the anticorrosive protection of conduits, metallic containers, transport for the transportation of the mineral fertilizers, metallic and concrete constructions, and also equipment in the cold climatic zone.

Producer